Integra RDV-1.1 User Manual download pdf (Page 21)

100

Getting to Know the RDV-1.1

—Continued

VIDEO OUT VIDEO (30)

These two sockets output composite video and can

be connected to a composite video input on a TV or

projector.

DIGITAL 1 AUDIO OUT (36, 38)

These sockets output digital audio and can be con-

nected to the digital audio input on a hi-ﬁ amp, AV

receiver, surround sound decoder (Dolby Digital,

DTS), or other component. There’s a coaxial output

and an optical output.

DIGITAL 2 AUDIO OUT (36, 38)

These sockets output digital audio and can be con-

nected to the digital audio inputs on a hi-ﬁ amp, AV

receiver, surround sound decoder (Dolby Digital,

DTS), or other component. There’s an AES/EBU

(balanced XLR) output, a coaxial output, and an

optical output.

IR IN/OUT (41)

The IR IN socket can be used to connect a commer-

cially available IR receiver, which can be used to

pickup signals from the remote controller when the

RDV-1.1 is located in another room, installed in a

rack, or is out of range of the remote controller

The IR OUT connector can be used to connect a

commercially available IR emitter, which can be

used to pass remote controller signals received by

the IR IN along to other components.

REMOTE CONTROL (40)

These (Remote Interactive) sockets can be con-

nected to the sockets on other Integra

RESEARCH AV components for interactive con-

trol.

To use you must make an analog audio connec-

tion between the RDV-1.1 and your Integra

RESEARCH AV receiver, even if they are already

connected digitally.

D.MIX AUDIO OUT (30, 31, 37)

These sockets output analog audio and can be con-

nected to a stereo analog audio input on a TV, hi-ﬁ

amp, or other component. If the source audio is

multichannel (Dolby Digital, DTS, DVD-Audio,

SACD), they output a 2-channel downmix.

FRONT, SURR 1, CENTER & SUBWOOFER

AUDIO OUT (37)

These sockets output 5.1-channel analog audio and

can be connected to a 5.1-channel analog audio

input on an AV receiver, surround sound decoder

(Dolby Pro Logic), or other component.

SURR 2 AUDIO OUT (37)

These sockets output the same analog audio as the

SURR1 outputs and can be connected to the analog

surround back left and right inputs on a 7.1-channel

AV receiver or other component. When using these

sockets, the SURR MODE switch should be set to

1+2.

SURR MODE (AUDIO OUT) switch (37)

This switch is used to set the surround output mode

of the analog multichannel audio outputs. If you

connect the SURR 2 outputs to a 7.1-channel AV

receiver or amp, set this switch to 1+2. This reduces

the output level by 3 dB. If you’re not using the

SURR 2 outputs, set this switch to 1.

HD VIDEO OUT COMPONENT 1 (31)

These BNC sockets output HD component video

and can be connected to the HD component video

input on an HDTV or projector. If you input HD

video to the component VIDEO IN socket, this out-

put should be connected to the HDTV or projector.

When an SD video signal is fed to a VIDEO IN

socket (component, S-Video, or composite), and the

video input source is set to External, that video sig-

nal is upconverted to progressive and output here.

When an HD video signal is fed to the component

VIDEO IN socket, and the video input source is set

to External, that HD video signal is output here at

the same resolution.

HD VIDEO OUT COMPONENT 2 (31)

These BNC sockets output HD component video

and can be connected to the HD component video

input on an HDTV or projector.

When an SD video signal is fed to a VIDEO IN

socket (component, S-Video, or composite), and the

video input source is set to External, that video sig-

nal is upconverted to progressive and output here.

When an HD video signal is fed to the component

VIDEO IN socket, and the video input source is set

to External, nothing is output by these sockets.

12V TRIGGER IN

This socket can be connected to the 12-volt trigger

output on an AV receiver or other component so that

the RDV-1.1 can be turned on remotely.

AC INLET (42)

The supplied power cord should be connected here.

AV CONNECTOR (32)

This SCART socket outputs RGB video, S-Video,

composite video, and analog stereo audio and can

be connected to the SCART socket on a TV, projec-

tor, or other component.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Comments to this Manuals

No comments

Integra RDV-1.1 User Manual Page 21

Comments to this Manuals

Related products and manuals for DVD players Integra RDV-1.1